Mechanical travel

360º（Endless）

Protection grade (IP)

IP40

Starting torque

≤5mN·m(50gf·cm)

Rotational life expectancy

25℃, No load at 40 r.p.m.500,000 shaft revolutions, Total resistance value variation:≤±5％ against initial value,Independent Iinearity tolerance:≤150％ of specified value, Noise:≤500Ω E.N.R.

Mass

Approx.23g

Housing material

Metal

Operating temperature range

-55℃～+105℃

Temperature cycle

5 cycles under -55℃～+105℃, total resistance value variation: ≤±5％, No mechanical damage.

Exposure at low temperature

24 hours at -55℃, Total resistance value variation: ≤±5％, No mechanical damage.

Exposure at high temperature

1,000 hours at 105℃, Total resistance value variation: ≤±5％, No mechanical damage.

Vibration

10Hz～2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5％, No mechanical and electrical damage.

Shock

490m/s², 11ms, 18 times, Total resistance value variation: ≤±1％, No mechanical and electrical damage.

Moisture resistance

40℃, 95％RH, 240 hours, Total resistance value variation: ≤±10％,Insulation resistance: ≥10MΩ.

Resistance temperature coefficient

±20p.p.m./°C

Standard resistance range

50Ω～10kΩ

Max. practical resistance value

20kΩ

Total resistance tolerance

Standard class ±3%(H)，Precision class ±1%(F)

Independent linearity tolerance

Standard class ±0.5%，Precision class ±0.25%（≤1kΩ, ±0.35%）

Electrical travel

355°±5°

Power rating

0.5W

Insulation resistance

≥1000MΩ(1000V.D.C.)

Dielectric strength

1000V.A.C./1 min

Noise

≤100ΩE.N.R.

Resistance value (Ω)

50;100;200;500;1k;2k;5k;10k;*20k

No. of wire turns

300;370;470;450;570;740;1000;1270;1670

Resist. wire used

Cu-Ni;Ni-Cr

Special resistance value

Lower resistance values (10Ω , 20Ω )

Special shaft type

Shaft with front and rear extension (Rear shaft with 3mm dia. and 20mm length), shaft dia. (φ6.35mm) & bushing with inch dimension, special machining on the shaft

Special electrical travel

Special electrical travel

Extra tap

Extra tap (Available up to 1 tap)

With stopper

With stopper (Rotating angle is

Special protection grade (IP)

320° and stopper strength is 0.9N・m [9kgf・cm])