Mechanical travel
360º（Endless）
Protection grade (IP)
IP40
Starting torque
≤4mN·m(40gf·cm)
Rotational life expectancy
25℃, No load at 40 r.p.m.1,000,000 shaft revolutions, Total resistance value variation:≤±5％ against initial value,Independent Iinearity tolerance:≤150％ of specified value, Noise:≤500Ω E.N.R.
Mass
Approx.55g
Housing material
Aluminum
Operating temperature range
-55℃～+105℃
Temperature cycle
5 cycles under -55℃～+105℃, total resistance value variation: ≤±5％, No mechanical damage."
Exposure at low temperature
24 hours at -55℃, Total resistance value variation: ≤±5％, No mechanical damage.
Exposure at high temperature
1,000 hours at 105℃, Total resistance value variation: ≤±5％, No mechanical damage.
Vibration
10Hz～2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5％, No mechanical and electrical damage.
Shock
490m/s², 11ms, 18 times, Total resistance value variation: ≤±1％, No mechanical and electrical damage.
Moisture resistance
40℃, 95％RH, 240 hours, Total resistance value variation: ≤±10％,Insulation resistance: ≥10MΩ.
Resistance temperature coefficient
±20p.p.m./°C
Standard resistance range
50Ω～20kΩ
Max. practical resistance value
50kΩ
Total resistance tolerance
Standard class ±3%(H)，Precision class ±1%(F)
Independent linearity tolerance
Standard class ±0.5%，Precision class ±0.1%（≤2kΩ, ±0.2%）
Electrical travel
355°±3°
Power rating
1.0W
Insulation resistance
≥1000MΩ(1000V.D.C.)
Dielectric strength
1000V.A.C./1 min
Noise
≤100ΩE.N.R.
Special resistance value
Lower resistance values (10Ω , 20Ω )
Special shaft type
Shaft with front and rear extension (Rear shaft with 6mm dia. and 15mm length), shaft dia. (φ6.35mm) with inch dimension, special machining on the shaft
Special electrical travel
Special electrical travel
Extra tap
Extra taps (Available up to 5 taps) With stopper (Rotating angle is
With stopper
330° and stopper strength is 0.9N・m [9kgf・cm])
Special mounting
Bushingmount type
Multi-ganged
Up to 7 gangs. Housing length is extended by 12mm per gang.
Special protection grade (IP)
IP54
