Model No.

13FLP12A；13FLP25A；13FLP50A；13FLP100A

Mechanical stroke (MS)

12.7mm；25.4mm；50.8mm；101.6mm

Protection grade (IP)

Approx.20N (2kgf)

Stopper strength Life expectancy, shaft reciprocating motions

No load at 120 c.p.m., 20,000,000 reciprocating motions, Total resistance value variation: ≤±10％ against initial value, Independent linearity tolerance: ≤150％ of specified value, Output smoothness: ≤150％ of specified value.

Friction

≤0.5N (50gf)；≤0.5N (50gf)；≤0.5N (50gf)；≤1.0N (100gf)

Mass

Approx.10g；Approx.15g ；Approx.25g；Approx.35g

Resistance temperature coefficient

±400p.p.m./℃

Operating temperature range

-30℃~+105℃

Temperature cycle

5 cycles under -30℃～+105℃, total resistance value variation: ≤± 10％, No mechanical damage.

Exposure at low temperature

24 hours at -30℃, Total resistance value variation: ≤±5％, No mechanical damage.

Exposure at high temperature

1,000 hours at 105℃, Total resistance value variation: ≤±10％, No mechanical damage.

Vibration

10Hz～2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5％, No mechanical and electrical damage.

Shock

490m/s², 11ms, 18 times, Total resistance value variation: ≤±1％, No mechanical and electrical damage.

Moisture resistance

40℃, 95％RH, 120 hours, Total resistance value variation: ≤±10％, Insulation resistance: ≥10MΩ.

Model No.

13FLP12A；13FLP25A；13FLP50A；13FLP100A

Electrical stroke

12.7±0.5mm；25.4±0.5mm；50.8±0.5mm；101.6±0.5mm

Standard resistance values

500,1k,2k,5k,10k(Ω)；500,1k,2k,5k,10k(Ω)；1k,2k,5k,10k,20k(Ω)；1k,2k,5k,10k,20k(Ω)

Total resistance tolerance

±20％ (M)

Independent linearity tolerance 标准级Standard class

Standard class ±2.0%；±1.5% ；±1.0％；±0.7％

精密级Precision class

Precision class ±1.0%；±0.7% ；±0.5％；±0.3％

Resolution

Essentially infinite

Output smoothness

≤ against input voltage 0.1%

Contact resistance variation

≤2% C.R.V.

Power rating

0.2W；0.4W；0.7W；1.2W

Insulation resistance

≥1000MΩ (500V.D.C.)

Dielectric strength

1 min (500V.A.C)

With spring return device

Spring return device mounted on the shaft (Please refer to the table in the dimension diagram for friction)

Special shaft

Special machining on the shaft

Speical protection grade (IP)

IP54