Mechanical travel
360°×n (n：Number of turns)
Protection grade (IP)
IP40
Starting torque
≤3mN·m (30gf·cm)
Stopper strength
Approx. 0.15N•m (1.5kgf•cm)
Appropriate fastening torque of the nut
≤0.8N·m (8kgf•cm)
Rotational life expectancy
25℃，No load at 40r.p.m；3Turns ——300,000 shaft revolutions；5Turns—— 500,000 shaft revolutions；10Turns——1,000,000 shaft revolutions；Total resistance value variation:≤ ± 5％ against initial value；Independent Iinearity tolerance:≤ 150％ of specified value；Noise: ≤500Ω E.N.R.
Mass
Approx. 10g （Both 5-turn and 10-turn)
Operating temperature range
-55℃～+105℃
Temperature cycle
5 cycles under -55℃～+105℃, total resistance value variation: ≤± 5％, No mechanical damage.
Exposure at low temperature
24 hours at -55℃, Total resistance value variation: ≤±5％, No mechanical damage.
Exposure at high temperature
1,000 hours at 105℃, Total resistance value variation: ≤±5％, No mechanical damage.
Vibration
10Hz～2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5％, No mechanical and electrical damage.
Shock
490m/s², 11ms, 18 times, Total resistance value variation: ≤±1％, No mechanical and electrical damage.
Moisture resistance
40℃, 95％RH, 240 hours, Total resistance value variation: ≤±10％,Insulation resistance: ≥10MΩ.
Resistance temperature coefficient
±20p.p.m./°C
Standard turns
5Turns；10Turns
Standard resistance range
100Ω~20kΩ；100Ω~50kΩ
Max. practical resistance value
50kΩ；100kΩ
Total resistance tolerance
Standard class ±3%(H)，Precision class ±1%(F)
Independent linearity tolerance Standard class
±0.35%；±0.25%
Independent linearity tolerance Precision class
±0.2%；±0.1%
Independent linearity tolerance (≤5kΩ)
(±0.25%)；(±0.15%)
Electrical travel
360°×n±5° (n：Number of turns)
Power rating
0.75W；1.5W
Insulation resistance
≥1000MΩ (500V.D.C.)
Dielectric strength
1 min (1000V.A.C)
Noise
≤100ΩE.N.R.
Standard resistance values (Ω)
100；200；500；1k；2k；5k；10k；20k；50k；100k
Number of wire turns 5Turns
920；1,190；1,250；1,510；1,790；2,380；3,120；3,800；5,430； —
Number of wire turns 10Turns
1,690；1,850 ；2,560；2,500； 3,030； 4,170； 4,760； 6,250 ；8,330；※10870
Resistance wire used
Cu-Ni；Ni-Cr
Special shaft type
Shaft with front and rear extension (Rear shaft with 0.8mm dia. and 10mm length), special machining on the shaft
Speical turns
3 urns（S12HPC-3）
Speical protection grade (IP)
IP54Simple sealed housing
