Mechanical travel
360°×n (n：Number of turns)
Protection grade (IP)
IP40
Starting torque
≤10mN·m (100gf·cm)
Stopper strength
Approx. 0.35N•m (3.5kgf•cm)
Appropriate fastening torque of the nut
In the case of panel thickness with over 2.5mm, the rotating torque may become heavier.)
Rotational life expectancy
25℃，No load at 40r.p.m；3 Turns ——300,000 shaft revolutions；5 Turns——500,000 shaft revolutions；10 Turns——1,000,000 shaft revolutions；Total resistance value variation:≤±5％ against initial value；Independent Iinearity tolerance:≤150％ of specified value；Noise: ≤500Ω E.N.R.
Mass
Approx. 20g（Both 5-turn and 10-turn）
Materials
Shaft: stainless steel, housing case: glass-filled nylon , bushing: metal brass, terminals: gold-plated brass (All terminals can be fitted with the Tyco 110 series faston receptacle (2.8× 0.5mm) or equivalents.)
Operating temperature range
-55℃～+105℃
Temperature cycle
5 cycles under -55℃～
Exposure at low temperature
+105℃, total resistance value variation: ≤± 5％, No mechanical damage.
Exposure at high temperature
24 hours at -55℃, Total resistance value variation: ≤±5％, No mechanical damage.
Vibration
1,000 hours at 105℃, Total resistance value variation: ≤±5％, No mechanical damage.
Shock
10Hz～2000Hz, 147m/s², 12 hours, Total resistance value variation: ≤±5％, No mechanical and electrical damage.
Moisture resistance
490m/s², 11ms, 18 times, Total resistance value variation: ≤±1％, No mechanical and electrical damage.
Resistance temperature coefficient
40℃, 95％RH, 120 hours, Total resistance value variation: ≤±10％,Insulation resistance: ≥10MΩ.
Standard turns
5Turns；10Turns
Standard resistance range
100Ω~20kΩ；100Ω~50kΩ
Max. practical resistance value
50kΩ；100kΩ
Total resistance tolerance
Standard class ±5%(J)，Precision class ±1%(F)
Independent linearity tolerance Standard class
±0.3%；≧5kΩ±0.15%，＜5kΩ±0.25%
Independent linearity tolerance Precision class
±0.2%；±0.1%
Independent linearity tolerance (≤5kΩ)
(±0.25%)；(±0.15%)
Electrical travel
360°×n±5° (n： Number of turns)
Power rating
1.0W；2.0W
Insulation resistance
≥1000MΩ (500V.D.C.)
Dielectric strength
1 min (1000V.A.C.)
Noise
≤100ΩE.N.R.
Standard resistance values (Ω)
100；200；500；1k；2k；5k；10k；20k；50k；100k
Number of wire turns 5 Turns
1,240； 1,560； 2,000； 2,510； 2,400； 3,200； 3,900； 4,800； ※5,500；-
Number of wire turns 10 Turns
2,100；2,480 ；3,300 ；4,000 ；5,020；5,000 ；6,400；7,800 ；10,100 ；※11,000
Resistance wire used
Cu-Ni； Ni-Cr
Special shaft type
Shaft with front and rear extension (Rear shaft with 6mm dia. and 15mm length), Special shaft dia. (φ3mm, φ3.175mm, φ4mm, φ5mm) , special machining on the shaft
Speical turns
1, 2, 3, 4, 6, 7 and 8-turn versions are available (These versions have the same dimensions)
Special mounting type
Servomount type (Same dimensions as 22HHPS-10)
With high torque
With high torque
Extra tap
Extra taps (Available up to 1 tap only for 10-turn model)
Slipping-clutch incorporated type
Slipping-clutch incorporated type (20mN•m~60mN•m)
Multi-ganged
Up to 10 gangs
Speical protection grade (IP)
Simple sealed housing
